Towing Tips from The Experts

If you are not an expert on the process of towing any vehicle in particular then you surely need a short lesson or two if you plan to tow another car to take it somewhere other than the place where it is currently stuck. If you are not a professional in the business of towing then you should probably make sure that you are going to do all the proper things that you should for the towing process to be smooth.  


Other than the smooth process, you also want the travel to be safe for you, the vehicle and the car that is going to be used to tow. This process of towing is definitely not a piece of cake because it really takes a whole lot of technique and knowledge for you to do it properly. Reading and experimenting or practicing could really get you a long way.  

But, we suggest that you refer to this article to know more about the things that you should know and do during the process of towing. Below, we have listed some tips that came from towing professionals that would surely teach you more things about the proper way on how to tow a vehicle. We would appreciate it if you would finish the article because then we would know that you have learned something from reading our article.  

Chains – We suggest that you put it in an “X” position so that you will know that everything would be secure. A chain is very significant in the process of towing. If anything happens with the tongue of the trailer towing truck, it would not fall to the ground or it would not hit the car that you are towing but instead it would fall to the chains because it is in a right position where it would become a safety net in the whole duration of the process of towing the car that you want to tow.  

Weight for Tongue – The tongue weight during the process of towing should be about twelve to fifteen percent of the entire weight of the trailer towing truck so that it would promote more stability for both of the vehicles. But there would also be instances when it would be impossible for the vehicles to promote balance so that means that you have to have a hitch that promotes equilibrium just like what the towing service in Edmonton is using or other places in the planet that gives people the same services.  

Tires – There is always a need for you make sure that the pressure on the tire is fine and that they are the greatest pressure. This will allow for it to be cooler.  

The most important thing that you should do in order to make sure that everything will be fine is inspection. Always do heavy inspection on all the parts of the towing vehicle and the vehicle that is going to be towed in order to make sure that everything will be okay during the trip. Inspection will surely save you a lot of time and effort.


Ways to Remove Asbestos by Yourself 

A licensed asbestos remover is recommended to remove asbestos in your home. However, in NSW, as long as you take the proper safety precautions, then you are good to go but only a maximum of 10 square meters of bonded asbestos is allowed to be removed.  

Remove Asbestos

Well, if you are planning to remove or replace your asbestos at home but you do not know how or lacks the proper equipment and tools to do the job, then there are many professional asbestos removing services such as  that offers high-quality work and guarantees customer satisfaction. 

Well, if you are confident enough and you have the proper equipment, tools, and permits to do the removal, then here are some ways that can help you remove asbestos in your home. 

    Obtain Permit 

An asbestos removal permit is needed when you want to remove your asbestos at home by yourself. Secure the right documents first before you proceed with the work. 

    Post Signs 

Signs must be used to warn members of your family as well as other people that you are currently removing asbestos in your home. Along the side of the house where removal is to occur, lay a six-foot wide strip of 6 mil sheet plastic long. It is advisable to work in the shade so that the wetted sliding will not dry up.  

You can also lay down an additional six foot by six foot piece of plastic sheet in a convenient spot next to the plastic strip along the wall to create an entrance/exit zone.  

    Cover Up Well and Wet the Area 

You must use your disposable coveralls and also put goggles, gloves, boots, and respirators equipped with HEPA filers.  About 10 square feet of siding must be hosed down. You should also mix 1 teaspoon of liquid dishwashing detergent with water and put in a spray bottle or in a garden pump sprayer. 

     Start Removal 

To minimize breakage, remove pieces by cutting nail head or pulling nails. Carefully lift siding pieces using pry tool to expose nail head if necessary. Immediately wet the broken or cracked areas with the pint size spray bottle or garden pump sprayer if siding begins to crumble or crack. The removed siding must be lowered to the ground and keep all debris on the plastic strip and keep on wetting it. 

    Remove Siding Pieces 

Put contaminated materials and wet debris in sturdy containers such as cardboard boxes or burlap slacks. The boxed should then be sealed in one or more layers of 6mil plastic. It can also be inserted into an asbestos waste disposal bag. 

    Double It Up 

In pre marked 6mil asbestos waste disposal bags, wrap or double bag other filled containers. First is twist the top of each filled bag and bend twisted part in half and seal it with duct tape. Use 6mil plastic and make sure all seams are sealed using duct tape if containers are to be wrapped rather than bagged. Each sealed package must have an asbestos warning label attached to it. 

    Clean and Remove Debris  

After the removal of asbestos, clean the area properly and dispose the waste materials and debris properly. Never attempt to use vacuum, you can use wet rags instead.